System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
Port Level Configuration Operations 1-75
Table 1-43. Sequence TS Parameters
Parameter Possible Values / Remarks
Src Start TS First time slot of the sequence
T1 ports: 1..24
E1 ports 1..31
No. of TS Number of time slots in the sequence
T1 ports: 1..(25 -Src Start TS)
E1 ports:
For Line Types E1 (G.732N) and E1 - CRC (G.732NCRC)
1..(32 - Src Start TS).
For Line Types E1 - MF (G.732S) and E1 - CRC-MF (G.732SCRC)
If Src Start ≤ 15 : 1..(16 - Src Start TS).
If Src Start ≥ 17 : 1..(32 - Src Start TS).
For ML-20 ports: 2..n
where Y is the lowest of the following
n=(32 -Src Start TS) or (n=Rate/64).
Dest Slot Destination card slot in the current MP-2100 for these time slots
IO-1..IO-12
Dest Port Destination port in the destination card slot for these time slots
external-1, external-2, internal-1
Dest Start TS First time slot in the destination port
T1 ports: 1..(25 - No. of TS).
E1 ports:
For Line Types E1 (G.732N) and E1 - CRC (G.732NCRC)
1..(32 - No. of TS).
For Line Types E1 - MF (G.732S) and E1 - CRC-MF (G.732SCRC)
If Src Start ≤ 15 : 1..(16 - Src Start TS).
If Src Start ≥ 17 : 1..(32 - Src Start TS).
For ML-20 ports: 1..(32 - No. of TS).
Direction Tx, Rx, Both, BcastSrc, BcastDst
TS Type NC, Data, Voice, Mng, Spare
Split Time Slot
In MTML card external ports, the time slots may be split into smaller parts so that
different bits are connected to different slots and/or ports. If a time slot is Split, you
can expand the table to view the connections of that time slot's bits.

To view the connections of a split time slot's bits:
• Click an entry whose slot is Split and click Expand or double-click the TS Src
or Slot of an entry whose slot is Split.
The Time Slots Table displays eight additional rows (one for each bit)
directly under the selected time slot.