System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
Port Level Configuration Operations 1-71
Figure 1-57. Time Slots Table
All parameters in the Time Slots Table are read-only.
Table 1-40. Time Slots Parameters
Parameter Possible Values / Remarks
Slot Slot in which the selected card is inserted IO-1 to IO-12
Card Type Type of the selected card
All MTML cards
Port Number of the selected port
external-1, external-2
TS Src Index number of the selected time slot
T1 link: 1..24
E1 link: 1..31
Slot Destination card slot in the current MP-2100
None, IO-1..IO-12, Split
Port Destination port in the destination slot. Options depend on the available ports on the
installed IO card
None, NA, external-1..external-12, Internal-1..Internal-13
Time Slot Destination time slot for the selected time slot in the current Megaplex. This
parameter is relevant if the destination slot contains an MTML card.
Assigned time slots are checked during sanity checks
T1 link – None, 1..24
E1 link – None, 1..31
Note