System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
Port Level Configuration Operations 1-65
VC Cards
When Encoding Mode=ADPCM, each port uses 1/2 TS. You must use two
adjacent/successive channels when using TSA with 'Encoding Mode' = ADPCM
(you can
connect BOTH ports of a pair or disconnect BOTH). In this case, you must
connect 2 ports (of a pair: 1-2, 3-4, 5-6) together.
VC Software Configuration Parameters

To configure software configuration parameters for a VC external port:
1. In the Card View, click the required port.
2. From the Configuration menu, select Port Info...
The Port Information dialog box appears (Figure 1-54).
3. Click the SW Cfg>> tab.
Figure 1-54. Software Configuration – VC Cards
Note