System information

Chapter 1 Edit Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
1-40 System Level Configuration Operations

To change the interface cost of a manager:
1. In the Managers Routing Table, select a manager and click <Change...>.
The Change Managers Routing Table dialog box appears.
2. Configure desired Interface Cost and click <Set>.
Figure 1-41. Change Interface Cost Dialog Box

To remove an entry in the Managers Routing Table:
• In the Managers Routing Table, select an entry and click <Remove>.
The entry is deleted from the NMS database.
Polling the Agent
You can manually poll the agent at any given instant. This is useful when you don’t
want to wait until the next automatic polling interval.

To manually poll the agent:
• From the Configuration menu, select Poll Agent.
The system polls the agent immediately.
Displaying Sanity Check Results
In the Megaplex Level of the Edit Configuration, you can display the results of the
Megaplex's latest sanity check.

To display the latest sanity check results:
• From the Fault menu, select Sanity Check Errors…
The Sanity Check Error List appears displaying a list of errors and/or
warnings detected during the latest sanity check.
If the latest sanity check detected no errors, the message “NO SANITY
ERRORS” appears.