System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 1 Edit Configuration Mode
System Level Configuration Operations 1-33
3. To see more information about a selected variant, click <Var. Data> to
display the Variant Data dialog box (Figure 1-30).
4. Click <OK> to enter the data in the NMS database.
Figure 1-34. Read V5.1 Variants
Setting Redundancy Table Parameters
The Redundancy Table command enables you to set redundancy parameters for
the Megaplex.
Only slots containing MTML and HSH cards are available for redundancy
operations. MTML-H ports can be redundant only to MTML-H ports; HSH ports can
be redundant only to HSH ports.

To view or change redundancy table parameters:
• From the Configuration menu, select Redundancy Table….
The Redundancy Table dialog box appears. Fields in the table (marked
with an asterisk *) can be reordered by clicking on their columns.
Redundancy Mode will display the parameters in the following order: Y
Cable, Dual Cable Parallel Tx. Additionally every group will be displayed
according to Primary Slot and Port ascending order.
Note