System information

Chapter 2 Agent Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
2-80 Release Notes
Displaying Intervals Data
You can view a selected 15-minute interval or cumulative totals of the data from
the previous 24 hours.

To view data from a selected interval from the previous 24 hours:
• From the Statistics menu, select Intervals Data followed by Table…
The Intervals Data Dialog Box appears. This dialog box shows the number
of intervals in the last 24 hours in which valid data that was collected by
the Megaplex.
The data parameters are the same as for the Current Data, except that the
performance data relates to the selected interval (Interval No.). The data may also
be displayed as a graph.

To view data from a selected interval from the previous 24 hours on a graph:
• From the Statistics menu, select Intervals Data followed by Graph…
The Intervals Graph Dialog Box appears. The data parameters are the same
as for the Current Graph, except that the performance data relates to the
selected interval (Interval No.).
2.12 Release Notes
Upgrading Software Version
When performing Software Upgrade of the agent, remove the old Database by
deleting the icon from the map and adding a new one.
VF-PBX Family Limitations
It is not recommended to use VF-PBX family cards on the MP2104 hub because
they have a limited power supply module. The Power Supply provides 6A while
the VF-PBX cards need 2.4A for Master and 2.1A for Slave. Since there are other
cards in the hub (CL, ML) only one VF-PBX card can be used.
Bi-directional Bypass
In order to remove Bi-directional Bypass between 2 ML ports in TSA which are
configured with 'Direction' =Both (for two entries, one for each port), it is
necessary to remove both entries. In addition, in order to change this Bypass to
Uni-directional, it is necessary to change the direction of one ML port, and to
change the other ML port TS connections from Both to Rx.