System information

Chapter 1 Edit Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
1-4 System Level Configuration Operations
3. On the active CL card, set the DIP/pin adjacent to the alarm LED to OFF.
1.3 System Level Configuration Operations
The Edit Configuration mode allows you to program and save up to 10
configurations for the current Megaplex, its cards and its ports. Up to
10 configurations can be stored in the RADview database and the CL
(common logic) cards of the Megaplex. The system can be programmed to switch
automatically between them in accordance with a predetermined daily schedule
(day/night operation), or to use one of the databases when it is required to switch
to a backup line.
Figure 1-4. Megaplex System Level – Edit Configuration Mode

To select the Edit Configuration mode:
• In the Megaplex View, click the border of the top hub in the window.
Zooming into the MP–2100/4 for the First Time
After RADview–HPOV Installation has completed, the first time you zoom into a
MP–2100/2104, the system processes the agent’s alarms descriptions. This process
may last for 3 minutes, without any indication that it is running.
Do not perform “Read” or “Update” operations during this period of time, as it may
lead to receiving an “Unknown Error/Alarms” description for some of the alarms.
Note