System information

RADview-PC/TDM Megaplex-2100/2104 User’s Manual Chapter 2 Agent Configuration Mode
Table 2-25. Port Information Parameters
Parameter Possible Values / Remarks
Slot Slot in which the selected card is inserted
CL-A, CL-B, IO-1 to IO-12.
For MP-2104: IO-1 to IO-5
Port Number of the selected port
external-1 to external-12, internal-1 to internal-12
Card Type Type of the selected card
Active Status Activity status of the selected port
Unknown – The port information is not supported
Not Used – Channel is not connected according to the current configuration
Offline – Channel is down
Online – Channel is up
Offline Redundancy – Redundant channel is down
Online Redundancy – Redundant channel is now up and is the active link
Test Status Indicates if a test is currently running on the selected port
Active, Not Active
Alarm Status Indicates if alarms or events exist in the selected port
Off – No alarms or events in port
Event – At least one alarm event (including state on, off events) since the last
Alarms>Clear operation
Major – At least one active major alarm since the last Alarms>Clear operation
Minor – At least one active minor alarm since the last Alarms>Clear operation
Interface Number Unique identifying number assigned to the selected port
Interface Desc Hardware interface type of the selected port
Port Software Configuration
For internal ports of HSH cards, the values FDL or TS0 are not valid values for
Inband Management.
Note
CL Cards

To view port information for a CL card:
1. In the Agent mode, double-click a CL card.
2. In the Card View, double-click a port.
The Port Information dialog box appears.
Or alternatively:
1. In the Card View, click a port.
2. Perform one of the following:
 From the Configuration menu, select Port Info
Or
 Click the Port Info button
.
The Port Information dialog box appears.
Agent Port Level Operations 2-47