System information

Chapter 2 Agent Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual
Figure 2-34. Mux All Active Alarm List
Table 2-19. Mux All Active Alarm List Parameters
Parameter Possible Values / Remarks
Code Code number of the alarm
Card Type Type of card in which the alarm originated. This parameter is not applicable for
Megaplex alarms
Slot Slot number of the card in which the alarm originated. This parameter is not applicable
for Megaplex alarms
Port Port number in which the alarm originated. This parameter is applicable only for port
alarms
Description Description of the alarm
Status Type of alarm. The possible values are:
Off - No alarms or events in port.
Event - At least one alarm event (including state on, off events) since the last
Alarms>Clear operation.
Major - At least one active major alarm since the last Alarms>Clear operation.
Minor - At least one
Date Date when the alarm occurred
Time Time when the alarm occurred
[Save File..] Click <Save File…> to save all buffer alarms in a file.
The default filename is output.txt. You can change this. In the Save dialog box click
<OK>.
2-38 Megaplex Level Fault Operations