System information

Chapter 2 Agent Configuration Mode RADview-PC/TDM Megaplex-2100/2104 User’s Manual

To display IP Bundle Alarms for a specific bundle:
1. Select an entry in the Bundle Active Alarms List.
2. Click <One Bundle…>.
A dialog box appears listing IP bundle alarms for the selected bundle.
Clearing Alarms
The Alarms>Clear command clears active Megaplex alarms from the Mux Active
Alarms list:

To clear active Megaplex alarms from the Mux Active Alarms List:
• From the Fault menu, select Alarms and Clear.
No user confirmation is requested.
Clearing All Alarms
The Alarms>Clear All command clears all active Megaplex, card and port alarms
from the Mux Active Alarms list.

To clear all active alarms from the Mux Active Alarms List:
• From the Fault menu, select Alarms followed by Clear All.
No user confirmation is requested.
Configuring Alarms
For Megaplex level alarms, you can configure the following:
• Severity
• Attributes
• Define the scope of alarm reports.
Setting Alarm Severity
Using the Severity command, you can set the level of severity for the various types
of alarms.

To set severity levels for alarms
• In the Fault menu, click Alarms, followed by Configuration and Severity &
ACM Relay…
The Alarms Severity dialog box appears.
2-30 Megaplex Level Fault Operations