Specifications

Introduction
MP2100M-LS-2 Modules - Installation and Operation Manual 1-19
Modem bit rates 2.4, 4.8, 9.6 or 19.2 kbps, synchronous
Modem clocking DTE1 (transmit clock from built-in modem and receive
clock to built-in modem)
Connectors See Table 1-1
Diagnostic Tests
−
Local and remote module loopback
−
Local channel loopback
−
Remote channel loopback
−
Local loopback upon command from external modem
Indicators
LS-2/M channels
−
CD (green, one for each sub-channel): lights when a valid
signal is received from the remote modem
−
TST (red, one for each sub-channel): lights when a
modem loopback is active
All other modules Local sync loss indicators, for indication of module
synchronization status
Configuration Programmable via system management