User`s manual

Chapter 4 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
4-24 Testing the Flow Based Configuration RV-EMS/NGN LA-210 Ver. 1.5
Policer Testing
Before performing the policer testing, verify the current Ingress BW settings.
³ To view the Ingress BW settings:
1. Verify that the Bandwidth profile of CoS 3 (service 777 p.bit 4) has been
previously configured as summarized in the BW Profiles list (
Figure 4-26 ).
2. To access the BW Profiles list, in the menu bar, click
Configuration>QoS>Ingress BW Profiles.
The Ingress BW Profiles List appears.
Figure 4-26. Ingress Profiles List
3. Select BW_for_service_777 and click <Change>.
The Change Ingress BW window appears with the current Ingress BW
profile settings.
Figure 4-27. Change window for BW_for_service_777, CIR = 5 Mbps, EIR = 2 Mbps
4. Modify the settings for CIR and and EIR as instructed in the next section and
repeat the statistics.
CIR is the committed bandwidth that the service provider guarantees to the
user, therefore they are called green packets.