User`s manual

Installation and Operation Manual Chapter 4 Configuring a Flow-Based Point-To-Point Application
RV-EMS/NGN LA-210 Ver. 1.5 Configuring LA-210 4-19
Figure 4-21. Adding Service (CoS)
5. Under CoS, enter 3 (cos 3 for p.bit 4).
6. Under Name, type a name, for example Service777_pbit_4.
7. Link a BW profile to the service. To do so, under Ingress BW Profile, click …
and then select BW_for_service_777 from the list (
Figure 4-22 ).
Figure 4-22. Ingress BW Profiles
The service is added ( Figure 4-23 ).