User`s manual

Chapter 4 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
4-18 Configuring LA-210 RV-EMS/NGN LA-210 Ver. 1.5
³ To define a bandwidth profile for VLAN 555:
1. Follow the instructions above.
2. Under Name, enter the desired bandwidth profile name, for example
BW_for_service_555
3. Set CIR to 2000 Kbps and EBS to 12176 Bytes (
Figure 4-20 ).
Figure 4-20. Adding Ingress BW Profile 555
4. Click <Set> to save your settings and then <Cancel> to close the Ingress BW
dialog.
³ To define a service for VLAN 777 and CoS 3 (p.bit 4)
1. In the LA-210 View window, select the System view.
2. On the menu bar, click Configuration > Flows.
The Flow dialog appears (
Figure 4-17 ).
3. Under User ETH1, select Flow 1, and then click <Add>.
4. Select Add Service.
The Add CoS window appears (
Figure 4-21 ).