User`s manual

Chapter 4 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
4-16 Configuring LA-210 RV-EMS/NGN LA-210 Ver. 1.5
Figure 4-17. Flow Definition
3. Under CoS Method, select Profile.
4. Under CoS Profiles, click … .
The existing CoS profiles appear listed.
5. Select CosProfile_no_1 from the list and click <Select>.
The CoS Profiles list closes and Flow 1 is linked to the newly created CoS
profile CosProfile_no_1 (
Figure 4-17 ).