User`s manual

Chapter 4 Configuring a Flow-Based Point-To-Point Application Installation and Operation Manual
4-14 Configuring LA-210 RV-EMS/NGN LA-210 Ver. 1.5
• Define two services for each CoS, VLAN 777 with CoS 3 (p.bit 4) and
VLAN 555 with CoS 6 (p.bit 7).
In addition you can determine the bandwidth options (policer) for each
service.
• Map CoS to Queue. This mapping is not configurable, but it is possible to set
the queue definition to Strict or WFQ.
Figure 4-14. Mapping Priority Bits (p.bits) to Classes of Service (CoS) - Scheme
³ To map p.bits to CoS:
1. In the LA-210 View window, select the System view.
2. On the menu bar, click Configuration > QoS.
The QoS menu appears.
3. Select CoS Profiles.
The CoS Profiles list appears.
Figure 4-15. CoS Profiles