User`s manual

Installation and Operation Manual Chapter 4 Configuring a Flow-Based Point-To-Point Application
RV-EMS/NGN LA-210 Ver. 1.5 Configuring LA-210 4-13
Figure 4-13. Flow Dialog with Flow Parameters
Configuring LA-210 for Advanced Configuration
This chapter explains how to map priority bits to classes of service. You can map
each p.bit to any CoS, thus setting different priorities via the CoS profile
configuration. You also can set a fixed p.bit per flow.
In the current example you will map p.bits to classes of service (CoS) as follows:
• Map p.bit 7 to CoS 6
• Map p.bit 4 to CoS 3