User`s manual

Installation and Operation Manual Chapter 4 Configuring a Flow-Based Point-To-Point Application
RV-EMS/NGN LA-210 Ver. 1.5 Configuring the System Parameters 4-7
A new host VLAN (Host VLAN ID 555) has been defined.
4. Press <S> to save this setting.
³ To configure the bridge ports:
1. Navigate to the Bridge Port menu (Configuration>Bridge>Bridge Port).
2. Navigate to User Port 1 and configure the respective parameters as illustrated
below.
ETX-202
Configuration>Bridge>Bridge Port
Port Label > (3)
Bridge port > (User 1)
1. Port\Stacking VID[1 - 4094] ... (777)
2. Default Priority Tag [0 - 7] ... (4)
3. Tag Handling (Stack)
Please select item <1 to 3>
F-Forward
ESC-prev.menu; !-main menu; &- exit 1 M/ 1 C
Figure 4-7. ETX-202 Client User Port 1– Bridge Port Menu
3. Press <F> to navigate to User Port 2 and configure the respective parameters
as illustrated below.
Bridge port 555 connects to the Client PC and enables viewing transmitting
content, for example a movie.
ETX-202
Configuration>Bridge>Bridge Port
Port Label > (4)
Bridge port > (User 2)
1. Port\Stacking VID[1 - 4094] ... (555)
2. Default Priority Tag [0 - 7] ... (5)
3. Tag Handling (Stack)
Please select item <1 to 3>
F-Forward
ESC-prev.menu; !-main menu; &- exit 1 M/ 1 C
Figure 4-8. ETX-202 Client User Port 2– Bridge Port Menu
³ To log off:
• If not already done, press <S> to save your new settings and, then press <&>
to terminate the connection.