User`s manual

Installation and Operation Manual Chapter 4 Configuring a Flow-Based Point-To-Point Application
RV-EMS/NGN LA-210 Ver. 1.5 Configuring the System Parameters 4-5
Configuring ETX-202 Server
This section instructs you on configuring ETX-202 Server and enabling the
management PC to access LA-210.
³ To configure the VLAN settings:
1. Navigate to the Encapsulation menu
(Configuration>System>Management>Host>Encapsulation).
ETX-202
Configuration>System>Management>Host>Encapsulation
1. Host Tagging (Tagged)
2. Host VLAN ID[1 - 4094] ... (555)
3. Host VLAN Priority[0 - 7] ... (7)
4. Security Definition > (All)
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit 1 M/ 1 C
Figure 4-3. ETX-202 Server – Enabling Host Tagging
2. Select Host Tagging.
Host tagging is enabled and additional parameters become available.
3. Select Host VLAN and enter 555.
A new host VLAN (Host VLAN ID 555) has been defined.
4. Press <S> to save this setting.
³ To configure the bridge ports:
1. Navigate to the Bridge Port menu (Configuration>Bridge>Bridge Port).
2. Navigate to User Port 1 and configure the respective parameters as illustrated
below.
ETX-202
Configuration>Bridge>Bridge Port
Port Label > (3)
Bridge port > (User 1)
1. Port\Stacking VID[1 - 4094] ... (777)
2. Default Priority Tag [0 - 7] ... (4)
3. Tag Handling (Stack)
Please select item <1 to 3>
F-Forward
ESC-prev.menu; !-main menu; &- exit 1 M/ 1 C
Figure 4-4. ETX-202 Server User Port 1– Bridge Port Menu