User`s manual

User’s Manual Chapter 3 Configuration Management
RV-EMS/NGN LA-210 Additional Tasks 3-43
3.3 Additional Tasks
RADview allows resetting the LA-210 hardware configuration. Resetting the
system hardware resets the agent.
Resetting the Agent
³ To reset the agent:
1. In the LA-210 View window, select the system.
2. On the menu bar, click Configuration > Reset > HW.
A confirmation dialog box appears.
Figure 3-34. Reset HW Dialog Box
3. Click <OK> to reset.
The agent’s hardware is reset.
Resetting the Configuration
RADview/TDM allows you to reset the LA-210 parameters to default values.
³ To reset the configuration:
1. In the LA-210 View window, select the system.
2. On the menu bar, click Configuration > Reset > Configuration.
A confirmation message appears.
Figure 3-35. Reset HW Dialog Box
3. Click <OK> to reset.
The agent's configuration is reset to its default values.