User`s manual

User’s Manual Chapter 3 Configuration Management
RV-EMS/NGN LA-210 Setting the Operational Parameters 3-41
Figure 3-31. QoS Classification
4. Select the desired classification and click Set.
The selected classification appears listed.
³ To map the QoS (802.1p):
1. In the LA-210 View window, select the System view.
2. On the menu bar, click Configuration > QoS.
The QoS menu appears.
3. Choose Mapping.
The Mapping dialog appears.
Figure 3-32. QoS Mapping
4. Select the desired user priority (0–7) and assign the desired traffic class
(0–3) by clicking Traffic Class and choosing a traffic class to each priority.
Each traffic class can be assigned to more than one priority.
5. Click <Set>.
The QoS is mapped and the QoS Mapping dialog closes.
³ To map the QoS (DSCP):
1. Navigate to the Mapping dialog as explained above.
2. Select the desired tag value (0–63) and assign the desired traffic class (0–3)
by clicking <Traffic Class> and choosing a traffic class to each tag value. Each
traffic class can be assigned to more than one tag value.