User`s manual

Chapter 3 Configuration Management User’s Manual
3-40 Setting the Operational Parameters RV-EMS/NGN LA-210
3. Click <Apply>.
The new MAC entry is added to the list.
Figure 3-30. Adding MAC Table Entry
³ To refresh the MAC table:
• In the MAC Table screen, select Refresh.
The MAC table is updated.
³ To remove a static MAC address:
1. In the MAC Table screen, select the desired entry.
2. Click Remove Static.
The selected MAC table entry is deleted.
³ To clear the MAC table:
• In the MAC Table screen, select Clear Learned.
The MAC table is clear, only the MAC addresses for Host and PCS remain
listed, which cannot be deleted.
Configuring QoS
LA-210 supports the following three methods of classification.
• 802.1 priority mapping
• DSCP priority mapping, using tag values
• Priority mapping per bridge port.
³ To classify the QoS:
1. In the LA-210 View window, select the System view.
2. On the menu bar, click Configuration > QoS.
The QoS menu appears.
3. Choose Classification.
The Classification dialog appears.