User`s manual

User’s Manual Chapter 3 Configuration Management
RV-EMS/NGN LA-210 Setting the Operational Parameters 3-39
Configuring MAC Tables
MAC addresses associated with physical ports can be associated with the bridge
ports.
³ To view the MAC table:
1. In the LA-210 View window, select the System view.
2. On the menu bar, click Configuration > Bridge.
The Bridge menu appears.
3. From the Bridge menu, choose MAC Table.
The MAC table appears.
Figure 3-29. MAC Table
³ To add a MAC table entry:
1. In the MAC Table screen, click <Add>.
The Add MAC Entry dialog appears (
Figure 3-30 ).
2. Add a MAC address and choose the Bridge port to associate it with.
 Select MAC Address, and enter a new MAC address.
 Select Receive Bridge Port, and choose the interface that this MAC
address is attached to.