User`s manual

User’s Manual Chapter 3 Configuration Management
RV-EMS/NGN LA-210 Setting the Operational Parameters 3-37
Parameter Possible Values / Remarks
frames.
Enable
Disable
Default: Disable
Note: Available only if the bridge operates in VLAN-Aware mode.
Accept Frame Type
All specifies that untagged frames received on this port are accepted and
assigned to the PVID for this port. Tag Only specifies that the device discards
untagged frames
All
Tag Only
Default: All
Note: Available only if the bridge operates in VLAN-Aware mode.
PVID / Stacking VID
This is the Port VID, the VLAN ID assigned to untagged frames or priority-tagged
frames received on the chosen port. If Stacking is enabled, this is the tag to be
added.
1–4094
Default: 2
Copy Original Priority
Copies the priority from the original frame, when stacking an additional tag
Enable
Disable
Default: Disable
Default Priority Tag
Default VLAN frame priority. Applies to untagged frames or stacked tags, when
the Copy Original Priority function is disabled.
0–7
Default: 0
Egress Tag Handling
Stacking adds the PVID to every frame transmitted from the port.
Stripping removes the first VLAN tag from every transmitted frame, on the egress
of the port.
Stacking
Stripping
None
Default: None
Ingress Tag Handling
Stacking adds the PVID to every frame received on the ingress of the port.
Stripping removes the first VLAN tag from every received frame, on the ingress of
the port.
Stacking
Stripping
None
Default: None
³ To update the Bridge Port list:
• In the Bridge port list (
Figure 3-27 ), click Refresh.
The Bridge Port list is updated.