User`s manual

User’s Manual Chapter 3 Configuration Management
RV-EMS/NGN LA-210 Setting the Operational Parameters 3-35
The Bridge menu is unavailable if Application Mode in the System Parameters
menu is set to Flows.
3. From the Bridge menu, choose Parameters.
The Bridge Parameters dialog appears.
Figure 3-26. Bridge Parameters Screen
Table
3-15. Bridge Parameters
Parameter Possible Values / Remarks
VLAN Mode
Forwarding is based on MAC address only or on VLAN+MAC.
Aware – Bridge operates according to 802.1Q
Unaware – Operates according to 802.1D.
Default: Unaware
Forwarding Mode
Determines whether the bridge learns MAC addresses.
Filter – Learning and filtering are enabled
Transparent – No learning is performed. Each packet received is forwarded to all
other ports automatically, unless static MAC is used.
Default: Filter
Aging Time (sec)
Aging time for entries in the MAC table. If the aging time elapses, and no frame
has been received from the MAC, it is erased from the MAC table.
300–4080
Default: 300
³ To define bridge ports:
1. In the LA-210 View window, select the System view.
2. On the menu bar, click Configuration > Bridge.
The Bridge menu appears.
3. From the Bridge menu, choose Ports.
The Bridge Ports list appears.
Note