User`s manual

User’s Manual Chapter 3 Configuration Management
RV-EMS/NGN LA-210 Setting the Operational Parameters 3-31
Figure 3-23. Adding a Flow (OAM)
Table
3-13. (OAM) Flow Parameters
Parameter Possible Values / Remarks
Flow ID Up to 8 flows can be added. Select the flow ID from the drop-down list.
1–8
Flow Name Assign a flow name
SP VLAN ID Specify the VLAN used to send the OAM for the specified Maintenance Entity
Group (MEP).
1–4094
Default: 1
ME Level The Maintenance Entity (OAM Domain) level
1–7
Read-only
Local MEP ID Indicates the maintenance entity group’s end point.
0–8191
Default: 1
Remote MEP ID The Remote MEP ID is the ID that incoming OAM messages will be identified by.
Every unit’s ID must remain unique. The local and remote ID must therefore not
be identical.
0–8191