User`s manual

Chapter 3 Configuration Management User’s Manual
3-30 Setting the Operational Parameters RV-EMS/NGN LA-210
³ To remove a flow:
1. Select the desired flow in the Interface list.
The flows appear listed.
2. Click Remove.
The selected flow is removed.
Configuring OAM (CFM)
This application supports the RAD proprietary OAM (CFM). When selecting the
OAM menu, a message indicates that the Standard OAM is not supported.
³ To define OAM flows:
1. In the LA-210 View window, select the System view.
2. On the menu bar, click Configuration > OAM (CFM).
A list of currently configured (OAM) flows appears.
Figure 3-22. List of current Flows
³ To add a flow:
1. In the OAM List screen, click <Add>.
The Add Flow dialog appears (
Figure 3-23 ).
2. Configure the parameters as outlined in
Table 3-13 .
3. Click <Set>.
The flow is added with three services associated.