User`s manual

Chapter 3 Configuration Management User’s Manual
3-28 Setting the Operational Parameters RV-EMS/NGN LA-210
Parameter Possible Values / Remarks
Marking The method defined for marking, either using an encoding table defined per flow
or using a fixed value.
Fixed - Fixed priority value will be marked on SP-TAG.
Profile - Marking will be derived from the marking profile attached to the Flow–
MIB value 255.
Note: This parameter displays for UNI ports only.
Marking Value An index to the Marking profile.
1 – 8
Default: 1
Marking Profile
CE-VLAN Action Defines the CE VLAN action for the current flow.
None
Stack
Swap
Default: Stack
Note: This parameter appears for UNI ports only.
³ To configure an existing flow:
1. Select the desired flow in the Interface list to the left.
The associated flow parameters appear.
2. Modify the desired parameters as detailed in
Table 3-12 and then click Apply.
The relevant parameters are modified.