User`s manual

User’s Manual Chapter 3 Configuration Management
RV-EMS/NGN LA-210 Setting the Operational Parameters 3-27
Parameter Possible Values / Remarks
User Port Mapping
Mode
Determines if the flow is composed of user defined ranges or from unclassified
frames.
Unclassified
User Mapping
Default: User Mapping
VLAN ID Defines the members of a VLAN to be mapped to the flow.
1 – <highest VLAN ID assigned (max. 4094)
Default: No members
VLAN 802.1p Defines the members of a VLAN P-bit to be mapped to the flow.
0 – <highest VLAN ID assigned (max. 7)
Default: No members
DSCP Defines the members of a DSCP/TOS priority bit to be mapped to the flow.
0 – 64
Default: No members
IP Precedence Defines the members of an IP Precedence to be mapped to the flow. The IP
precedence is derived from the TOS bits 0-2 precedence.
0 – 7
Default: No members
CoS Method Defines the method to classify frames to specific services.
Fixed
Profile
Default: Profile
CoS Value
Fixed service CoS value
0 – 7
Default: 0
CoS Profile The name of the CoS profile
Default: CoSDefaultProfile1
Ingress BW Profile Ingress Bandwidth Profile index
Unfined
DefaultIngressBW1
Default: Undefined
SP VLAN Action Defines the SP-VLAN action for the current flow.
None
Stack
Default: Stack
Note: This parameter displays for UNI ports only.
SP VLAN The VLAN that will be added to the flow when it egresses from the network.
0, 1 – 4094
Default: 0 (no VLAN specified)
Note: This parameter displays for UNI ports only.