User`s manual

User’s Manual Chapter 3 Configuration Management
RV-EMS/NGN LA-210 Setting the Operational Parameters 3-25
Parameter Possible Values / Remarks
Flow Key Determines the field used by the classifier for mapping.
• CE-VLAN ID
(flow will be based on list of CE-VLANs),
• CE -802.1p
(flow will be based on a list of CE-VLAN P-bit values)
• DSCP
(flow will be base on a list of DSCP values)
diffServ, IP Precedence
(flow will be base on TOS Precedence bits (TOS0-2)
• IP Precedence
Default: CE-VLAN ID
Defaults Possible Values / Remarks
VLAN ID
The default VLAN Identifier used for mapping purpose when the flow key is
CE-VLAN ID and frames arrive without VLAN tag.
1 – 4094
802.1p Default 802.1p value used for classification purposes when the flow key is CE -
802.1p and a frame arrives without VLAN TAG
- Or -
Used for CoS mapping with the Ingress Priority Method set to 802.1p and a
frame arriving without VLAN tag
0 – 7
DSCP Default DSCP value, used for mapping when the flow key is DSCP and a frame
arrives without IP Header
- Or -
Used for CoS mapping when the Ingress Priority Method = DSCP and a frame
arrives without IP header.
0 – 63
IP Precedence Default IP Precedence value used for mapping purpose when the flow key is IP
Precedence and a frame arrives without IP Header
– Or –
used for CoS mapping when the Ingress Priority Method = IP Precedence and a
frame arrives without IP header.
0 – 7
³ To add the flow:
1. Verify that the intended interface is selected and click Add.
The Add Flow screen appears.
2. Set the parameters as detailed in
Table 3-12 and then click Set.