User`s manual

User’s Manual Chapter 3 Configuration Management
RV-EMS/NGN LA-210 Setting the Operational Parameters 3-23
Parameter Possible Values / Remarks
Egress Rate Limit (Kbps) Defines the length of the internal queue length.
0 –32
Default: 10
³ To refresh the Internal Queue Profiles list:
• In the Internal Queue Profiles list, click Refresh.
The Internal Queue Profiles list is updated.
Adding, Editing and Removing Flows
When adding a flow, you have to first choose the flow interface where the flow
starts, and set the flow key and configure the defaults. Only then you add the
flow and configure the flow parameters.
³ To choose the flow interface and to define the flow key and the defaults:
1. In the LA-210 View window, select the System view.
2. On the menu bar, click Configuration > Flows.
The Flows screen appears.
The Flows menu is unavailable if Application Mode in the System Parameters
menu is set to Bridge.
3. In the Flows screen, in the interface list to the left, select the desired
Ethernet interface.
Parameters associated with the selected interface appear as illustrated in
Figure 3-19 .
4. Set the parameters as detailed in
Table 3-11 and then click Apply.
oNote