User`s manual

User’s Manual Chapter 3 Configuration Management
RV-EMS/NGN LA-210 Setting the Operational Parameters 3-21
³ To edit an existing Marking profile:
1. In the Marking Profiles list, select the desired Marking profile and click
Change.
The Change Marking Profiles dialog appears. This screen is identical with
the Add Marking Profiles screen, only the ID field is read-only.
2. Edit the parameters as desired and then click Set.
The Marking Profile parameters are updated
³ To refresh the Marking Profiles list:
• In the Marking Profiles list, click Refresh.
The Marking Profiles list is updated.
³ To remove an existing Marking profile:
• In the marking Profiles list, select the desired Marking profile and click
Remove.
The selected Marking profile is removed from the list.
One Marking profile must remain listed and cannot be deleted.
Defining Internal Queue Profiles
The section below explains how to view, add, edit and remove Internal Queue
profiles for a flow.
³ To view existing Internal Queue Profiles:
1. In the LA-210 View window, select the System view.
2. On the menu bar, click Configuration > QoS.
The QoS menu appears.
3. Select Internal Queue Profiles.
The Internal Queue Profiles list appears.
Figure 3-17. Internal Queue Profiles List
Note