User`s manual

Chapter 3 Configuration Management User’s Manual
3-18 Setting the Operational Parameters RV-EMS/NGN LA-210
2. Configure the parameters as detailed in Table 3-8 and then click Set.
The CoS profile is added.
Table 3-8. CoS Profile Parameters
Parameter Possible Values / Remarks
ID Selects a CoS profile identification number.
1–8
Name Assigns a nam to the ingress bandwidth profile.
String of up to 20 characters
Default: CoSProfile<ID>
Ingress Priority Method Defines the Committed Information Rate (CIR) for the current profile. The CIR
specifies a bandwidth with committed service guarantee (“green bucket” rate).
802.1p
DSCP
IP Precedence
Default: 0
³ To map CoS profiles to user priorities:
1. In the map, select the desired CoS values that are associated with user
priorities.
 To select multiple CoS Map values, press and hold <Ctrl> and click the
desired CoS Mapping values.
2. To modify the CoS map values, click CoS and then select a value between 0
(lowest priority) and 7 (highest priority).
3. Click <Set>
The new CoS Mapping values are set.
³ To edit an existing CoS profile:
1. In the CoS Profiles list, select the desired CoS profile and click Change.
The Change CoS Profiles dialog appears. This screen is identical with the
Add CoS screen, only the ID field is read-only.
2. Edit the parameters as desired and then click <Set>
The CoS Profile parameters are updated
³ To refresh the CoS Profiles list:
• In the CoS Profiles list, click Refresh.
The CoS Profiles list is updated.
³ To remove an existing CoS profile:
• In the CoS Profiles list, select the desired CoS profile and click Remove.
The selected CoS profile is removed from the list.