User`s manual

User’s Manual Chapter 3 Configuration Management
RV-EMS/NGN LA-210 Setting the Operational Parameters 3-15
Figure 3-11. Ingress BW Profiles List
³ To add an Ingress BW profile:
1. In the Ingress BW Profiles list, click Add.
The Add Ingress BW Profiles dialog appears.
Figure 3-12. Adding an Ingress BW Profile
2. Configure the parameters as detailed in Table 3-7 and then click Set.
The Ingress BW profile is added.
Table 3-7. Ingress BW Profile Parameters
Parameter Possible Values / Remarks
ID Selects an ingress bandwidth profile identification number.
1–64
Default: 1
Name Assigns a nam to the ingress bandwidth profile.