User`s manual

User’s Manual Chapter 3 Configuration Management
RV-EMS/NGN LA-210 Setting the Operational Parameters 3-9
Parameter Possible Values / Remarks
Loop Attenuation
Threshold
Defines the loop attenuation alarm threshold. To enable the slider, check Enable.
0–127 db
Default: 0
SNR Margin Threshold This parameter configures the SNR margin alarm threshold. To enable the slider,
check Enable.
0–15 db
Default: 0
Viewing and Configuring Ethernet Port Parameters
You can view and configure Ethernet port parameters for LA-210.
³ To view and modify Ethernet port parameters:
1. In the LA-210 View window, select an Ethernet port.
2. On the menu bar, click Configuration > Parameters.
The Ethernet Port parameters associated with the selected port appear.
Figure 3-6. Ethernet Port Parameters Dialog Box
3. Fill in the fields, as described in Table 3-4 .
4. Click <Set> to implement the changes.