User`s manual

Chapter 3 Configuration Management User’s Manual
3-6 Setting the Operational Parameters RV-EMS/NGN LA-210
3.2 Setting the Operational Parameters
This section discusses how to manage LA-210 ports for operation using RADview
LA-210.
Managing ports includes the following tasks:
• Selecting the port
• Viewing and modifying port parameters
Additional port operations are discussed in the following chapters:
• Monitoring port performance (see
Chapter 5 )
• Configuring event reports for Ethernet ports (see
Chapter 7 ).
• Diagnostics (see
Chapter 7 ).
Viewing and Configuring SHDSL Port Parameters
RADview allows you to view and modify parameters and monitor the line status.
You view and set parameters for each SHDSL line separately.
Figure 3-4. Port Level Configuration Menu
³ To view and modify SHDSL port parameters:
1. In the LA-210 View window, select an SHDSL line on one of the SHDSL ports
(1, 2, 3 or 4) ports as illustrated in
Figure 3-5 .
2. On the menu bar, click Configuration > Parameters.
The SHDSL Line Parameter screen is displayed.
3. Configure the relevant SHDSL line as detailed in
Table 3-3 .