User`s manual

Chapter 2 Installation and Operation User’s Manual
2-16 Using the Graphical User Interface (GUI) RV-EMS/NGN LA-210
Figure 2-16. Port Status Indicators (Blue, Magenta, and Gray)
Table
2-4. Port Status Indicators
Port Color Description
SHDSL Magenta Errors indicated
Blue Active test on port
Gray No errors exist and no tests are running
10/100/1000 BASE-T Magenta Errors indicated
Blue Active test on port
Gray No errors indicated and no tests running
LEDs
RADview LA-210 displays LED indicators in real-time as they actually appear on
the device. The LED indications describe communication and operation status of
LA-210 and its links (see
Table 2-5 ).
Figure 2-17. LA-210 (Front Panel) LEDs
Table
2-5. LA-210 LED Summary
Name Function
PWR (green) On: RV-EMS/NGN LA-210 is on
Off: RV-EMS/NGN LA-210 is off
TST (red) On: A test is active
Off: A test is inactive
ALM (red) On: A new alarm is detected in the alarm buffer
Off: No alarm currently detected
WAN (SHDSL SYNC 1, 2, 3, 4 - green/red) Blinking (green): SHDSL line is being synchronized
Blinking (green/orange): At least one line synchronized and the
second one is trying to.
On (orange): At least one line is synchronized and at least one
line is not.
On (green): All enabled lines are synchronized
Blinking (red): No line is synchronized, at least one line is
trying to synchronize.
On (red): No line is synchronized.