User`s manual

User’s Manual Chapter 2 Installation and Operation
RV-EMS/NGN LA-210 Connecting LA-210 to Network Management Stations 2-7
2.3 Connecting LA-210 to Network Management
Stations
LA-210 can be managed by a network management station (NMS) via of the unit
Ethernet ports. The connection can be made either from a local LAN, or from a
remote location, via a PSN connected to one of the ETX Ethernet ports.
Inband Management
RV-EMS/NGN LA-210 can be managed via SNMP by a Network Management
Station (NMS) over one of unit’s SHDSL uplink ports.
³ To connect LA-210 to the Network Management Station:
1. Verify that the management parameters are properly configured.
2. Connect an Ethernet ports to the PSN on which management traffic from an
authorized NMS flows.
Out-of-Band Management
RV-EMS/NGN LA-210 can be managed via SNMP by a Network Management
Station (NMS) on the LAN (hub or switch) connected to the one of the unit’s
Ethernet ports.
³ To connect LA-210 to the Network Management Station:
1. Connect one of the Ethernet links to a port of an Ethernet switch or hub
serving the network to which the NMS is connected.
2. Make sure that the physical port connected to the NMS network is not bound
to a bridge.