User`s manual

User’s Manual Chapter 7 Fault Management
RV-EMS/NGN LA-210 Managing the History Log 7-7
 Sort the alarm buffer list by clicking on one of the columns on the list.
You can sort each column independently. The Alarm Buffer list is sorted
according to the Date and Time column by default with the oldest shown
on the first line.
 To send the Alarm Buffer to a printer, click <Print>
 To save the Alarm Buffer to a file, click <Save to File>, select a location to
where to save the file, name the file and click <Save>.
 To retrieve/display the next 500 entries in the Alarm Buffer, click <Next>.
The history log can have a maximum of 1000 entries, and displays the
first 500 upon opening the dialog box, and the last 500 entries upon
clicking <Next>.
 To update the list, click <Refresh> or exit the window by clicking <Close>.
Table 7-2. History Log Alarm List Dialog Box Parameters
Parameter Possible Values / Remarks
Code The error code associated with the alarm
Port The logical port where the error occurred.
Description Description of the alarm.
Read-Only
Severity The severity of the alarm
Info
Minor
Major
Critical
Date & Time Date and time the alarm occurred.
Date format: yyyy-mm-dd
Time format: hh:mm:ss
Read-Only
Table 7-3. RADview-EMS/NGN LA-210 Events
Event Description
Cold Start Unit has been restarted.
Fatal Error XX Hardware failure has been detected.
Fatal Error At XX Line XX Hardware failure has been detected.
System User Reset Overall reset was performed by the user.
Link Down (Port 1 \ Port 2 \ Port 3) Network or user Ethernet port has been disconnected.
Link Up Port (Port 1 \ Port 2 \ Port 3) Network or user Ethernet port has been connected.
Link Admin Down Port (Port 1 \ Port 2 \ Port
3)
Network or user Ethernet port has been disabled by the user.
Login Via (Telnet, Web, Terminal) LA-210 has been accessed via Telnet, Web or terminal.