User`s manual

Chapter 6 Security Management User’s Manual
6-6 Configuring Management Access RV-EMS/NGN LA-210
Table 6-2. Manager List Dialog Box Parameters
Parameter Possible Values / Remarks
Manager ID Index of a specific IP address.
1–10
Read Only
IP Address Destination address of the traps, a management station used to access LA-210.
Setting the IP address to 0.0.0.0 removes the entry.
IP address format: xx.xx.xx.xx
Mask Trap Type of traps the agent should mask and not send to the NMS.
Cleared (not selected): The specific manager will receive traps from the device
Checked (selected): The specific manager will not receive traps from the device.
Default: Cleared
6.4 Configuring Management Access
RADview LA-210 enables/disables Telnet access, and Web management access.
³ To enable/disable Telnet and Web management accesses:
1. In the LA-210 View window, select the system.
2. On the menu bar, click Options > Access.
Figure 6-3. Management Access Dialog Box
3. Fill in the fields, as described in Table 6-3 .
4. Click <Set> to implement the change(s).