User`s manual

User’s Manual Chapter 6 Security Management
RV-EMS/NGN LA-210 Configuring SNMP 6-5
³ To view or specify the management station IP address to which to send traps:
1. In the LA-210 View window, select the system.
2. On the menu bar, click Options > Manager List.
Figure 6-2. Manager List Dialog Box
3. Fill in the fields, as described in Table 6-2 .
4. Change the IP addresses, as required.
5. To configure that the specific manager will not receive traps from the device,
select the relevant Mask Traps check box adjacent to that address.
6. To configure that the specific manager will receive traps from the device,
clear the relevant Mask Traps check box adjacent to that address.
7. Set the UDP Trap Port.
8. Click <Set> to implement the changes.
Upon set, the NMS checks the IP Address. If it is 0.0.0.0 and Mask Trap
check-box is checked, the following error-message appears in the status
bar: “Illegal IP Address when Traps are Masked”.