User`s manual

User’s Manual Chapter 5 Performance Management
RV-EMS/NGN LA-210 Viewing System Statistics 5-5
Table 5-2. Flows Statistics - Port Parameters
Parameter Possible Values / Remarks
Interface Port to which the values apply.
USER - ETH 1
USER - ETH 2
USER - ETH 3
USER - ETH 4
Flow ID The flow ID, assigned when the flow was added.
Flow Name The flow name, assigned when the flow was added.
User Port Mapping Mode Determines if the flow is composed of user defined ranges or from unclassified
frames.
Unclassified
User Mapping
Default: User Mapping
VLAN ID The members of a VLAN mapped to the flow.
1 – <highest VLAN ID assigned (max. 4094)
Default: No members
VLAN 802.1p The members of a VLAN P-bit mapped to the flow.
0 – <highest VLAN ID assigned (max. 7)
Default: No members
DSCP The members of a DSCP/TOS priority bit mapped to the flow.
0 – 64
Default: No members
IP Precedence The members of an IP Precedence mapped to the flow. The IP precedence is
derived from the TOS bits 0-2 precedence.
0 – 7
Default: No members
CoS Method The method to classify frames to specific services.
Fixed
Profile
Default: Profile
Co Value
Fixed service CoS value
0 – 7
Default: 0
CoS Profile The name of the CoS profile
Default: CoSDefaultProfile1
Ingress BW Profile The Ingress Bandwidth Profile index
Unfined
DefaultIngressBW1
Default: Undefined