User`s manual

Installation and Operation Manual Chapter 4 Configuring a Flow-Based Point-To-Point Application
RV-EMS/NGN LA-210 Ver. 1.5 Testing the Flow Based Configuration 4-33
³ To modify the CIR and EIR:
1. Configure Service777_pbit_4 to CIR = 5000 Kbps EIR = 2000 Kbps.
2. Configure Service555_pbit_7 to CIR = 0 Kbps and EIR = 2000 Kbps.
3. For the SHDSL connection, navigate to the PCS dialog (Configuration > SHDSL
Lines > PCS) and set the Egress Rate Limit to 1000 Kbps (
Figure 4-32 ).
4. To view the CoS statistics, navigate to Statistics > Flows Statistics > CoS – 6
and click <Statistics>.
Table 4-16. Statistics for Flow 1_(VLAN777-555) -
Service 555_pbit_7 (CoS 6), Upstream, CIR = 32 Kbps, EIR =2 Mbps,
Fwd Green Packets 0 Fwd Green Bytes 0
Fwd YellowPackets 258 Fwd Yellow Bytes 17544
Dccrd Green Packet 0 Dscrd Green Bytes 0
Dscrd Yellow Packets 0 Dscrd Yellow Bytes 0
Dscrd Red Packets 0 Dscrd Red Bytes 0
Table 4-17. Statistics for Flow 1_(VLAN777-555) -
Service 777_pbit_4 (CoS 3), Upstream, CIR = 5 Mbps, EIR =2 Mbps,
Fwd Green Packets 44158 Fwd Green Bytes 60852602
Fwd YellowPackets 0 Fwd Yellow Bytes 0
Dccrd Green Packet 16430 Dscrd Green Bytes 22635579
Dscrd Yellow Packets 0 Dscrd Yellow Bytes 31694
Dscrd Red Packets 0 Dscrd Red Bytes 0
• Service555_pbit_7 (CoS 6):
All yellow packets are transferred since they are associated with CoS 6, which
are transmitted at a higher priority than the ones associated with CoS 3.
• Service777_pbit_4 (CoS 3):
Some green packets are transferred and others are dropped since the Egress
rate limit (SHDSL) is set to 1 Mbps and Service555 has a higher priority,
causing its packets to be transferred first.