Specifications

Chapter 4 Configuration Installation and Operation Manual
4-30 Configuring for Operation LA-210 Ver. 1.5
LA-210
Configuration > Applications > Flows > Flow Definition
1. ID [1 – 8] ... (1)
2. Name ... (Name)
Interface ()
3. User Port Mapping Mode (User Mapping)
4. Classification >
5. CoS Method (Fixed)
6. CoS Value[0–7] (1)
7. CoS Profile (CoSDefaultProfile1)
8. Ingress BW Profile (Default BW1)
9. Encapsulation >
10.CoS >
a-Add; f-Forward; b-Backward; d-Delete; ^F-Frw(Port); ^B-Bkw(Port)
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-29. Flows Definitions Screen
Table
4-13. Flow Definitions
Parameter Possible Values Remarks
ID
1 – 8
Flow ID, automatically assigned when adding a flow.
Name
Assign a name to a specific flow
Default: Name-<ID#>
Interface
ETH-1 – ETH-4
PCS 1
The user interface in which the flow starts.
Default: ETH-1
User Port Mapping
Mode
Unclassified
User Mapping
Determines if the flow is composed of user defined ranges or
from unclassified frames.
Default: User Mapping
Classification
Refer to
Figure 4-30 and Table 4-14
CoS Method
Fixed
Profile
Defines the method to classify frames to specific services.
Default: Profile
CoS Value
0 – 7 Fixed service CoS value
Default: 0
CoS Profile
The name of the CoS profile
Default: CoSDefaultProfile1
Ingress Bandwidth
Profile
Unfined
DefaultIngressBW1
Ingress Bandwidth Profile name
Default: Undefined
Encapsulation
Refer to
Figure 4-31 and Table 4-15
CoS
Refer to
Figure 4-1 and Table 4-16
Classifying the Flows
This section illustrates how to map packets belonging to various logical groups to
flows.