Specifications

Installation and Operation Manual Chapter 4 Configuration
LA-210 Ver. 1.5 Configuring for Operation 4-29
Table 4-12. Flow Interface Defaults
Parameter Possible Values Remarks
VLAN ID 1 – 4094 Default VLAN Identifier used for mapping purpose when
the flow key is SP-VLAN / SP-VLAN And 802.1p / CE-VLAN
ID and frames arriving without VLAN tag.
802.1p 0 – 7 Default 802.1p value used for classification purposes
when the flow key is CE -802.1p and a frame arrives
without VLAN TAG
- Or -
Used for CoS mapping with the Ingress Priority Method set
to 802.1p and a frame arriving without VLAN tag
DSCP 0 – 63 Default DSCP value, used for mapping when the flow key
is DSCP and a frame arrives without IP Header
- Or -
Used for CoS mapping when the Ingress Priority Method =
DSCP and a frame arrives without IP header.
IP Precedence 0 – 7 Default IP Precedence value used for mapping purpose
when the flow key is IP Precedence and a frame arrives
without IP Header – Or –
used for CoS mapping when the Ingress Priority Method =
IP Precedence and a frame arrives without IP header
³ To define the flow:
1. From the Flows menu (Configuration > Applications > Flows), select Flow
Definition.
The Flow Definition menu appears.
2. To add a flow, press <A>.
A new flow is added and a Flow ID is assigned.
3. Specify the desired interface (ID) before you press <S> for Save.
The interface parameter becomes read-only once you saved for the first
time.
4. To assign a flow name, select Flow Name, type a name of your choice, and
then press <Enter>.
The desired name is assigned to the flow you added.
5. Configure the remaining parameters as detailed below.
 To navigate to a different flow ID, press <F> or <B> to browse the Flow
IDs forward or backward respectively.
 To navigate to a different flow interface, press <^F> or <^B> to navigate
forward or backward to the desired flow interface.