Specifications

Chapter 4 Configuration Installation and Operation Manual
4-28 Configuring for Operation LA-210 Ver. 1.5
Table 4-11. Flow Interfaces
Parameter Possible Values Remarks
Flow Key • CE-VLAN ID
(flow will be based on list of CE-
VLANs),
• CE -802.1p
(flow will be based on a list of CE-
VLAN P-bit values)
• DSCP
(flow will be base on a list of DSCP
values)
diffServ, IP Precedence
(flow will be base on TOS
Precedence bits (TOS0-2)
• IP Precedence
• SP-VLAN ID
(flow will be based on list of SP-
VLANs)
• SP-VLAN ID + SP-802.1p
(flow will be based on a list of SP-
VLAN ID and SP-VLAN P-bit values)
Determines the field used by the classifier
for mapping.
Default:
User port = CE-VLAN ID
Network Port = SP-VLAN ID
Defaults Refer to Figure 4-28 and Table 4-12
³ To define the defaults:
1. From the Flows Interfaces menu, select Defaults.
The Defaults menu appears.
2. Define the defaults as detailed below.
LA-210
Configuration > Applications > Flows > Flow Interfaces >
Defaults
1. VLAN ID [1 – 4094] (1)
2. 802.1p [0 – 7] (0)
3. DSCP [0 – 63] (0)
4. IP Precedence [0 – 7] (0)
s-Save
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-28. Flows Interface Defaults Screen