Specifications

Chapter 4 Configuration Installation and Operation Manual
4-22 Configuring for Operation LA-210 Ver. 1.5
Binding a Bridge Port
The unit is supplied with the bridge ports pre-bound to the physical interfaces as
shown in
Table 4-9 .
Table 4-9. Bridge Port Bindings
Bridge Port Bound to
1 Reserved for management host
2 Fast Ethernet Port 1
3 Fast Ethernet Port 2
4 Fast Ethernet Port 3
5 Fast Ethernet Port 4
6 PCS Port 1
Configuring VLAN Membership
³ To configure VLAN Membership:
• From the VLAN Membership menu (Configuration > Applications > Bridge >
VLAN Membership), perform the following
 Select VLAN ID and type the VLAN ID that you wish to configure.
 Select Egress Tagged Ports and define the set of ports to transmit
packets for this VLAN as tagged.
 Select Egress Untagged Ports and define the set of ports to transmit
packets for this VLAN as untagged.
 Press <A> to add BP to this VLAN.
 Press <F> to toggle through the VLAN IDs.
 Press <R> to delete the configuration.
LA-210
Configuration > Applications > Bridge > VLAN Membership
1. VLAN ID (1)
2. Egress Tagged Ports > (1,2)
3. Egress Untagged Ports > (3,4)
F – Forwards; B – Backwards; R – Remove; S - Save
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 4-19. VLAN Membership Screen