Specifications

Installation and Operation Manual Chapter 4 Configuration
LA-210 Ver. 1.5 Configuring for Operation 4-21
Table 4-8. Bridge Port Parameters
Parameter Possible Values Remarks
Bridge Port
Number
1–6 To switch to the desired bridge port, enter the bridge port number
associated with that bridge port.
Default: 2
Note:
• Bridge port number 1 is reserved for the host bridge port.
• Available bridge ports depend on the number of Ethernet ports
on your LA-210 unit. You cannot add or delete bridge ports.
Activation
Enable
Disable
Specifies if this port is part of the bridge or not.
Default: Enable
Ingress Filtering Enable
Disable
When Enabled, the device discards incoming frames for VLANs which
do not include this port in its member set. When Disabled, the port
accepts all incoming frames.
Default: Disable
Note: Available only if the bridge operates in VLAN-Aware mode.
Accept Frame
Type
All
Tag Only
Tag Only specifies that the device discards untagged frames. All
specifies that untagged frames received on this port are accepted
and assigned to the PVID for this port.
Default: All
Note: Available only if the bridge operates in VLAN-Aware mode.
Port VID /
Stacking VID
1–4094 This is the PVID, the VLAN ID assigned to untagged frames or
priority-tagged frames received on this port. If Stacking is enabled,
this is the tag to be added.
Default: 2
Copy Original
Priority
Enable
Disable
Copy priority from original frame, when stacking an additional tag
Default: Disable
Default Priority
Tag
0–7 Default VLAN frame priority. Applies to untagged frames or stacked
tags, when the Copy Original Priority function is disabled.
Default: 0
Egress Tag
Handling
Stacking
Stripping
None
Stacking: Adds the PVID to every frame transmitted from the port.
Stripping: Removes the first VLAN tag from every transmitted frame,
on the egress of the port.
Default: None
Ingress Tag
Handling
Stacking
Stripping
None
Stacking: Adds the PVID to every frame received on the ingress of
the port.
Stripping: Removes the first VLAN tag from every received frame, on
the ingress of the port.
Default: None