Specifications

Chapter 4 Configuration Installation and Operation Manual
4-20 Configuring for Operation LA-210 Ver. 1.5
³ To remove a static address from the table:
• From the Static MAC Table, select a MAC address that you want to remove
and press <R>.
The MAC address is deleted from the table.
³ To clear the MAC table:
1. In the Static MAC Table, press <C> to clear the table.
The following message appears: Are you sure (Y/N)?
2. Press <Y> to confirm deletion of all MAC addresses from the table.
Configuring the Bridge Ports
After you set the general bridge parameters, configure the individual bridge ports
as explained below.
³ To configure the bridge ports:
1. From the Bridge Port menu (Configuration> Applications > Bridge > Bridge
Port), select a bridge port to be configured.
 To select a bridge port, select Bridge Port and enter the desired bridge
port number according to
Table 4-9 .
2. Configure the LA-210 bridge ports according to
Figure 4-18 and Table 4-8 .
LA-210
Configuration > Applications > Bridge > Bridge Port
Bind To > (Fast Ethernet 1)
1. Bridge port [1 – 6] ...(2)
2. Activation > (Enable)
3. Ingress filtering (Disable)
4. Accept frame type (All)
5. Port VID / Stacking VID [1 – 4094] ...(3)
6. Copy Origin Priority (Disable)
7. Default Priority Tag [0-7] ...(4)
8. Egress Tag Handling > (None)
9. Ingress Tag Handling > (None)
F-Forward; B-Backward; S - Save
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 4-18. Bridge Ports Screen