Specifications

Installation and Operation Manual Chapter 4 Configuration
LA-210 Ver. 1.5 Configuring for Operation 4-19
Using the Static MAC Table
Static MAC addresses are stored in the MAC table.
³ To add a static address to the table:
1. In the Static MAC Table (Configuration > Applications > Bridge > Static MAC
Table), press <A>.
The Static MAC Table screen switches to the Add mode as illustrated in
Figure 4-17 .
2. In Add mode, perform the following:
 Select MAC Address, and enter a new MAC address.
 Select VLAN ID, and choose a VLAN ID for the MAC address, 1-4094.
 Select Receive Bridge Port, and choose the interface that this MAC
address is attached to.
LA-210
Configuration > Applications > Bridge > Static MAC Table
MAC address Receive Bridge port
1 11-11-11-11-11-11 1
| 2 22-22-22-22-22-22 2
v 3 33-33-33-33-33-33 3
4 44-44-44-44-44-44 3
5 55-55-55-55-55-55 5
1. MAC address … (11-11-11-11-11-11)
C – Clears the table ; S – Save ; A – Add entry
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 4-16. Static MAC Table Screen
LA-210
MAC Table Handling
1. MAC address … (00-00-00-00-00-00)
2. Bridge port [1 – N] (1)
S - Save
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 4-17. Static MAC Table, Add Mode